HOW TO GET VoLTE IN YUPHORIA (YU5010 & YU5010A) 2016

  HELLO YUPHORIA USERS….
 I AM GOING TO SHOW YOU HOW TO GET “VoLTE” IN YUPHORIA ..( YU5010 & YU5010A)

AFTER RELEASE OF JIO 4G ..AND THEIR AWESOME UNLIMITED OFFER EVERYONE WANTS TO USE JIO 4G IN THEIR DEVICES…
MANY OF US USING IT RIGHT NOW….IN THEIR 4G DEVICES …LIKE YUPHORIA…YUREKA….ETC.
BUT MAIN PROBLEM IS THAT ALL 4G DEVICES DOESNT HAVE “VOLTE” FEATURE….THAT IS REQUIRED TO CALL VIA JIO SIM…..I KNOW THERE IS ALTERNATE OPTION AVAILABLE ..”JIO4GVoice” APP…BUT THAT APP HAS LOTS OF ISSUES…..SO ITS TIME TO GET RID OF THIS APP..



AND YUPHORIA (YU5010) ALSO IN THIS LIST..WHICH DOESN’T SUPPORT VoLTE ….
BUT STOCK VARIANT OF YUPHORIA (YU5010A)..NOW GOT VoLTE SUPPORT VIA OTA SOFTWARE UPDATE…..AND YU5010 STILL DESNT GET ANY VoLTE UPDATE….



BUT DONT WORRY YU5010 USERS….HERE IS A METHOD ..TO ENABLE VoLTE IN YOUR YU5010…..BUT U HAVE TO LEAVE COS ( CYNOGEN ROM)…IF YOU ARE READY TO LEAVE COS THEN GO AHEAD AND GET VoLTE IN YOUR YUPHORIA …..

HERE IS ALL STEPS WHICH YOU HAVE TO FOLLOW…..

STEP 1. DOWNLOAD STOCK FASTBOOT FIRMWARE OF YU5010A .

STEP 2. DOWNLOAD FIRMWARE FROM HERE….

NOTE:- plzz download firmware from this link…it iks tested and have all adb and fastboot  command file included. if u will download from other source..they dont have fastboot command file..which can be leads to u…flashing error.



STEP 3. AFTER DOWNLOAD FIRMWARE….EXTRACT IT.

STEP 4. BEFORE FLASHING IT PLZZ TAKE BACKUP OF YOUR INTERNAL STORAGE DATA BECAUSE IT WILL WIPE YOUR INTERNAL STORAGE.

STEP 5. AFTER TAKING BACKUP…NOW SWITCH OFF YOUR DEVICE.

STEP 6. NOW PRESS VOLUME UP KEY + POWER BUTTON ..AND BOOT INTO FASTBOOT MODE.

NOTE:- Make Sure You Have  PROPERLY  Installed All adb Drivers Properly In Your Pc.


 PDANET AND ADB V1.4.3 RECOMMNDED.    DOWNLOAD LINK :-

**pdanet+ and adb v1.4.3 ..both adb files in this zip…just download it…extract it….and install both adb files in your PC.

STEP 7. NOW OPEN FOLDER ..WHERE YOU EXTRACT FIRMWARE…

STEP 8. NOW CONNECT YOUR PHONE TO PC.

STEP 9. AND NOW JUST RUN ” fastboot_A1.bat “. NOW IT WILL START TO FLASH FIRMWARE AND WILL REBOOT AUTOMATICALLY AFTER PROCESS GOT DONE.

STEP 10. AFTER FLASHING AND REBOOTING DEVICE..SETUP ALL THINGS.

STEP 11. NOW IN DEVICE ..GO TO SETTING  AND CHECK FOR SOFTWARE UPDATE…

*** THIS IMAGE IS JUST FOR ALLUSIVE PURPOSE ONLY. YOU WILL GET DIFFERENT VERSION OTA UPDATE.

STEP 12. NOW U WILL GET UPDATE ..NOW DOWNLOAD OTA SYSTEM UPDATE AND FILE VIA WIFI…AND JUST INSTALL IT. DON’T WORRY ABOUT INSTALLATION FAILED …IT WILL NOT HAPPEN…BECAUSE U JUST FLASHED RIGHT FIRMWARE FILE WHICH NEEDS TO THIS OTA UPDATE.

NOW WAIT TO INSTALL UPDATE AND REBOOT IT AUTOMATICALLY…
DONT WORRY IF DEVICE GET TWO REBOOTS..IT WILL BE NORMAL..

AFTER UPDATE YOUR BUILD NO. SHOULD BE LIKE THIS..

NOW LAST THING …CHECK YOUR VoLTE …JUST SCROLL DOWN QUICK SETTING PANNEL ..IF YOU SEE (HD) LETTER IN YOUR JIO NETWORK..IT MEANS YOU GOT SUCCESSFULLY INSTALLED VoLTE ENABLED ROM IN YOUR YUPHORIA.


NOW YOU DON’T NEED “JIO4GVoice” APP TO CALLING VIA JIO SIM…NOW DO CALLING VIA YOUR STOCK PHONE DIALER….WITH OT WITHOUT DATA ENABLED AS YOU WISH.